Ph. D. Zisan Zhang :Analysis, Design and Optimization of RF CMOS Polyphase FiltersDissertation angenommen durch: Universität Duisburg-Essen, Campus Duisburg, Fakultät für Ingenieurwissenschaften, Abteilung Elektrotechnik und Informationstechnik, 2005-09-30 BetreuerIn: Prof. Dr.-Ing. habil. Peter Jung , Universität Duisburg-Essen, Campus Duisburg, Fakultät für Ingenieurwissenschaften, Abteilung Elektrotechnik und Informationstechnik GutachterIn: Prof. Dr.-Ing. habil Peter Jung , Universität Duisburg-Essen, Campus Duisburg, Fakultät für Ingenieurwissenschaften, Abteilung Elektrotechnik und Informationstechnik Schlüsselwörter in Englisch: low-IF Bluetooth receiver, optimization algorithm, System-on-a-Chip, component mismatch, process tolerance, computer-aided design for RF Ics, optimization algorithms, quadrature accuracy, RF-CMOS-design, RF Quadrature generation, Monte-Carlo Simulation., genetic algorithms, worst-case simulation |
|||||
Klassifikation | |||||
Sachgruppe der DNB: 620 Ingenieurwissenschaften |
|||||
Abstrakt | |||||
• PPFANA, a dedicated computer-aided software tool for analysis of the influences from the nonideal effects, namely, process tolerance, components mismatch on the quadrature accuracy of the RF CMOS PPFs, was developed by the author and presented in this dissertation. • Physical design considerations for RF CMOS PPFs in system-on-a-chip (SoC) solution were proposed by the author through the analysis on the influences from parasitic effects in RF SoC. • Silicon success of an RF CMOS PPF designed by the author for a low-IF Bluetooth receiver using Fraunhofer-IMS 0.6 µm CMOS process was achieved. • PPFOPTIMA, a computer-aided synthesis and optimization tool for RF CMOS PPFs with dedicated worst-case simulation and Monte Carlo simulation toolboxes for verification of the performance of RF CMOS PPFs, was developed by the author and presented in this dissertation. |
|||||